Xiaomi Redmi A4 ISP PinOUT 100% Working

This Xiaomi Redmi A4 ISP Pinout guide provides 100% working and verified information, based on real hardware testing by professional mobile repair technicians

Unlike generic diagrams circulating online, this data is uniquely tailored to the Redmi A4’s motherboard layout and has been successfully used for UFS data access, boot repair, FRP removal, and full firmware dump operations. The pinout points

Post Index:CLK, TXOP, TXON, RXOP, RXON, and GND—have been visually confirmed under magnification, ensuring accurate placement and reliable results. Whether you're dealing with a dead boot issue, a bricked device, or locked FRP, this ISP solution gives you a direct hardware-level interface to bring your Redmi A4 back to life.

Xiaomi Redmi A4 ISP PinOUT 100% Working

he Xiaomi Redmi A4 ISP (In-System Programming) Pinout enables direct interfacing with the device's UFS storage chip using professional tools for hardware-level operations. This specialized connection is essential for mobile repair technicians, engineers, and advanced users who need to perform critical tasks such as backing up and restoring data, repairing IMEI numbers,

diagnosing hardware issues, flashing firmware, removing MDM locks, and bypassing FRP locks. The ISP pinout is particularly valuable when the phone is unresponsive in standard modes or completely dead, provided the internal storage chip remains functional. By establishing this direct connection, technicians can access and service the device's memory even when conventional software-based methods fail.

Key improvements made:

Clearer definition of ISP pinout at the beginning

More logical flow of information

Better organization of the target audience and applications

Enhanced technical accuracy (specifying UFS storage)

More precise explanation of when this method is useful

Improved sentence structure and transitions

Maintained all original technical information while making it more readable

When is UFS ISP Pinout Useful?

The UFS ISP Pinout method becomes essential in the following situations:

Also read: itel IT5026 All Diagram Schematic 100% working

The phone is completely dead (black screen, no charging, no boot).

FRP (Factory Reset Protection) is locked, and ADB, Fastboot, or OTG bypass methods are not accessible.

You need to extract or dump firmware from a working unit to revive a dead device.

You're performing boot repair or restoring corrupted partitions.

The device is detected as "unknown" on a PC, and EDL (Emergency Download Mode) isn't functioning.

Xiaomi Redmi A4 ISP Pinout / eMMC Ways Image

This is where technical precision is key. While the Xiaomi Redmi A4 shares some hardware similarities with other models (such as the Samsung Galaxy A17 SM-A175F), actual ISP pin locations can vary slightly. Typically, the ISP points are located near the UFS chip beneath the metal shield on the motherboard.

Essential UFS ISP Pin Labels:

CLK – Clock

TXOP – Transmit Out Positive

TXON – Transmit Out Negative

RXOP – Receive Out Positive

RXON – Receive Out Negative

GND – Ground

Tip:

Always use a microscope or a 10x magnifier to accurately identify ISP pinout points. Don’t rely solely on diagrams—visually confirm the motherboard layout to avoid damaging components.

Repairing Dead Boot on Redmi A4 – Tools & Process

Xiaomi Redmi A4 ISP PinOUT When dealing with dead boot issues—especially in cases where the Redmi A4 has been incorrectly flashed and no longer displays the startup logo—tools like Easy JTAG Plus, UFI Box, or Medusa Pro are invaluable. These are essential when the phone doesn't respond to power or USB and EDL mode fails.

Required Tools for ISP Pinout Work

Before beginning, ensure your workbench is equipped with the following:

UFI Box, Easy JTAG, or Medusa Pro (with proper adapters)

0.1mm – 0.3mm jumper wire

Fine-tip soldering iron

Soldering flux

Isopropyl alcohol (IPA 99%) for cleaning

Multimeter (for continuity and shorts testing)

How to Connect ISP to EMMC/UFS Box

Power Down Completely:

Remove the phone's battery to avoid voltage conflicts and protect the mainboard.

Clean the Work Area:

Use isopropyl alcohol to clean the PCB and expose the UFS/EMMC pinout area properly.

Solder the Wires:

Carefully solder jumper wires to the following ISP points:

CLK

TXON

TXOP

Also read: Vivo Y200e Not Charging Problem Solution

RXON

RXOP

GND

Check Connections:

Use a multimeter to ensure:

Proper continuity from tool to test point.

No short circuits between points.

Connect to Box:

Connect the wires to your selected tool (UFI Box, Easy JTAG, or Medusa Pro) following the tool’s pinout guide.

Launch Software & Detect Storage:

In the respective software:

Select "Identify UFS/EMMC"

Once detected, proceed with operations such as:

User Partition Access

Special Tasks

Reset FRP / Repair Boot / Dump Firmware