Vivo Y200e Not Charging Problem Solution

Vivo Y200e Not Charging If the Vivo Y200e is not charging, the issue can often be traced to hardware faults rather than the battery or charger itself. Begin by checking the USB charging port for any physical damage, dust, or corrosion.

Use a microscope to inspect the charging sub-board and mainboard connector for any broken lines, burnt components, or signs of water damage. If the port and connector appear intact, test the voltage using a multimeter. In cases where the charging line is open or disconnected, apply a jumper wire between the damaged point and the correct location on the motherboard,

Post Index:as shown in a circuit diagram. Use flux and micro-soldering tools to ensure clean and precise connections without damaging nearby components. After repairs, reassemble the device and verify the charging functionality with a reliable charger. This method can often restore charging capability without needing to replace the entire board.

Vivo Y200e 5G Not Charging? Here's a Complete Hardware-Level Repair Guide

Vivo Y200e Not Charging If you're a mobile technician dealing with charging issues on the Vivo Y200e 5G, this detailed troubleshooting guide — complete with motherboard-level jumper solutions and reference images — will help you restore the device without replacing the sub-board.

In most cases, charging faults in the Vivo Y200e stem from hardware-related issues such as damaged PCB lines, loose connectors, or a broken charging port. Carefully inspecting each component and applying the correct jumper fix can bring the phone back to working condition.

Common Causes of Charging Issues in Vivo Y200e:

Damaged or dirty USB charging port

Disconnected or faulty charging sub-board

Defective charging cable or power adapter

Also read: vivo V27 5G ISP Pinout Solution

Faulty or bloated battery

Software glitches or recent firmware updates

Moisture damage affecting PCB circuit tracks

Step-by-Step Hardware Repair Instructions:

Vivo Y200e Not Charging Power off and disassemble the Vivo Y200e carefully.

Inspect the charging sub-board and verify the connection to the main motherboard.

Look for any visible damage, broken lines, or corrosion — especially in the bottom-left section of the sub-board.

If any track is damaged, refer to the provided image and run a jumper wire from the charging port area on the sub-board to the corresponding point on the motherboard.

Reassemble and test the device with a known working charger.

Vivo Y200e Not Charging Use flux and precision micro-soldering tools to avoid causing further damage during the repair process. After completing the necessary work, reassemble the Vivo Y200e and test its charging functionality. Inspect all components and PCB tracks thoroughly—refer to the Vivo Y200e schematic—to spot any signs of corrosion, carbon buildup, liquid exposure, or faulty elements. If any components are damaged beyond repair, proceed with caution when replacing the motherboard. For any missing or broken tracks, carefully apply jumper wires to restore connectivity.

Also read: Realme C21Y (RMX3263) Display Light Solution

Be sure to visit our website for updated repair tips, detailed solutions, and advanced troubleshooting guides. New content will be added as it becomes available. You can also browse related posts below for more insights into mobile phone repair and issue resolution.