Zte Blade A51 Network Lock Fix 100%

Zte Blade A51 Network Lock If your ZTE Blade A51 is showing a network lock message after a firmware update or hardware change, don’t worry—there’s a proven solution.

Unlike traditional unlock codes or paid services, this method uses a custom-patched firmware developed by UmiTeam that automatically removes the network restriction. By simply unlocking the bootloader, carefully flashing the modified firmware (while skipping the critical miscdata partition),

Post Index:and performing a factory reset, your device becomes permanently unlocked for any network. This is a 100% free, offline solution that works without rooting or third-party apps. It's ideal for technicians and users who want a fast, reliable fix without additional cost or tools.

ZTE Blade A51 Network Lock? Here's a Free Auto Patch Fix from UmiTeam

Zte Blade A51 Network Lock Is your ZTE Blade A51 stuck with a network lock? This often happens after flashing new firmware or replacing the EMMC, causing the phone to request an unlock code—a frustrating issue for many technicians.

But don’t worry—UmiTeam has a free solution for you! They've created a special Network Lock Auto Patch firmware designed to fix this problem easily.

This isn't a code generator—instead, it’s a modified firmware that you flash onto your phone. Once installed, it automatically patches the system to remove the network lock. It’s a powerful and simple fix that gets your device back up and running in no time!

How to Use This Free Patch (Step-by-Step Guide)

You must follow each step carefully. Do not skip any steps—doing so will cause the fix to fail!

Step 1: Unlock the Bootloader (Most Important!)

Before anything else, you must unlock the bootloader of your ZTE Blade A51.

Also read: Android Multi Tool v1.3.3.5 Latest Update

If the bootloader is still locked, you won’t be able to flash the patched firmware. This is the most critical step—do it first!

Step 2: Download and Extract the Files

Zte Blade A51 Network Lock Once you've downloaded the patch, extract the .RAR file using any file extraction tool.

Inside, you'll find the modified firmware files needed for flashing.

Step 3: Set Up Your Flash Tool

Open your preferred flash tool (such as SP Flash Tool or any tool that supports ZTE devices).

Load the extracted, patched firmware files into the tool.

Step 4: UNCHECK “miscdata” (Very Important!)

Within the flash tool, you'll see a list of partitions to be flashed.

Find the partition labeled “miscdata” and untick (uncheck) it.

⚠️ Do NOT flash the miscdata partition! This step is crucial for the patch to work properly.

Step 5: Flash the Patched Firmware

Zte Blade A51 Network Lock Now that miscdata is unticked, go ahead and click the “Flash” or “Download” button (depending on your tool).

Wait for the process to complete. It must reach 100% successfully.

Step 6: Perform a Hard Reset

Flashing alone is not enough—you need to do a hard (factory) reset.

To do this:

Boot the phone into recovery mode (usually by holding Volume Up + Power).

Select “Wipe data/factory reset” and confirm.

Step 7: Done!

Once the reset is complete, reboot your phone.

Also read: F3arRa1n Tool For Windows Latest Update

Your ZTE Blade A51 should now be fully network unlocked—no more unlock code required!

Download link: